Meir Sliding Door Edge Pull Champagne MDH-E1-CH
Notify me when back in stock
Calculate Shipping
Description
MEIR / SLIDING DOOR HARDWARE
Sliding Door Edge Pull in Champagne
MeirÂ’s sliding-door edge pull provides a grip at the leading edge of a door that slides into a cavity. It is especially useful when the door is drawn back far enough that its face pull is difficult to reach. Champagne brings a light, warm-metal accent that sits naturally with pale timber, warm white paint and understated stone surfaces.
The compact pull keeps the door edge functional without adding a large projecting fitting.
PRODUCT FUNCTION
Reach a door concealed in the cavity
An edge pull provides a place to engage the door when it has been pushed into its cavity or recess. Use it alongside a suitable sliding-door face pull where a concealed door needs to be drawn forward again.
DESIGN & USE
A small detail with a specific job
The narrow edge-facing plate occupies just 80 × 22mm, with a 14mm-deep body. That makes it a visually quiet piece of door hardware even when the door is fully extended.
DESIGN & FINISH
A softer Champagne detail on the sliding-door edge pull
Champagne gives the sliding-door edge pull a softly warm metallic presence alongside light timber, warm-white paint and pale stone. Because the edge pull is small, the finish provides a subtle point of continuity when it is glimpsed along the door edge.
For Champagne hardware, consider warm whites, natural oak and pale stone as complementary room finishes.
MEASURE BEFORE ORDERING
Plan the sliding-door leading-edge cut-out
Confirm that the sliding door edge has room for the 80 × 22mm faceplate and 14mm body depth. Check available timber/door construction and interference with any existing lock or edge fittings.
Overview?
The Meir Sliding Door Edge Pull in Champagne is designed for its stated sliding door edge pull application. An edge pull provides a place to engage the door when it has been pushed into its cavity or recess. Use it alongside a suitable sliding-door face pull where a concealed door needs to be drawn forward again. Please check the installation layout and required configuration before ordering.
Features?
- Designed for sliding-door edge access
- Narrow faceplate
- Recessed installation
- Finish coordination with Meir door hardware
- Champagne finish with subtle warmth
Specifications?
| Range | Sliding Door Hardware |
| Model | MDH-E1-CH |
| Product type | Sliding Door Edge Pull |
| Finish | Champagne |
| Material | Solid stainless steel |
| Installation | Door edge mounted |
| Application | Sliding-door edge |
| Function | Edge grip / retrieval |
| Faceplate | 80mm × 22mm |
| Body depth | 14mm |
| Internal body height | 69mm |
| Rear body width | 17mm |
| Warranty | Meir Lifetime Warranty (subject to manufacturer terms) |
Installation & Planning?
- Check the door edge width and condition before creating a recess.
- Allow for a body depth of 14mm.
- Position so the pull remains accessible when the door is inside the cavity.
- Clean with mild washing soap solution, rinse and dry with a soft cloth; avoid abrasive and citrus-based cleaners.
Frequently Asked Questions
What does a sliding-door edge pull do?
Does it replace a flush pull?
Where does it fit?
How large is the faceplate?
Do I need an edge pull if the face pull stays accessible?
More Options
Combine an edge pull with a suitable sliding-door flush pull, selecting passage or privacy hardware according to the room.
Browse our cabinet and vanity handles to see complementary hardware finishes available at Swan Street.
WELS : N/A
(BA3443)
